Part Number Hot Search : 
SR1660 MC4828 IRF730 12S05 SR1690 KE220 SMS8198 MAX328
Product Description
Full Text Search
 

To Download B41554B7100Q000 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  aluminum electrolytic capacitors capacitors with screw terminals series/type: b41554 date: october 2015 ? epcos ag 2015. reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited. epcos ag is a tdk group company.
long-life grade capacitors applications highly professional power supplies features outstanding reliability wide temperature range good thermal characteristics and high ripple current capability long useful life shelf life up to 10 years all-welded construction ensures reliable electrical contact rohs-compatible construction charge-discharge proof, polar aluminum case with insulating sleeve poles with screw terminal connections mounting with ring clips or clamps capacitors with screw terminals b41554 sikorel  125 c page 2 of 18 please read cautions and warnings and important notes at the end of this document.
1) refer to chapter "general technical information, 5 useful life" on how to interpret useful life. specifications and characteristics in brief rated voltage v r surge voltage v s 16 ... 100 v dc 1.15  v r rated capacitance c r capacitance tolerance 1500 ... 220000 f  10/+30%  q leakage current i leak (5 min, 20 c) self-inductance esl d = 35.7 mm: approx. 10 nh d = 51.6 mm: approx. 15 nh d 3 64.3 mm: approx. 20 nh useful life 1) d 51.6 mm d 3 64.3 mm requirements: 125 c; v r ; i ac,r > 2500 h > 5000 h  d c/c  45% of initial value 85 c; v r ; i ac,max > 15000 h > 25000 h esr 3 times initial specified limit 40 c; v r ; 3.4  i ac,r > 200000 h  i leak initial specified limit 40 c; v r ; 3.8  i ac,r  > 200000 h voltage endurance test post test requirements: 125 c; v r ; i ac,r 2000 h  d c/c  15% of initial value esr 1.3 times initial specified limit i leak initial specified limit vibration resistance test to iec 60068-2-6, test fc: frequency range 10 ... 55 hz, displacement amplitude 0.75 mm, acceleration max. 10 g , duration 3 2 h. capacitor mounted by its body which is rigidly clamped to the work surface. iec climatic category to iec 60068-1: 55/125/56 (  55 c/+125 c/56 days damp heat test) detail specification sectional specification similar to cecc 30301-804 iec 60384-4 ripple current capability due to the ripple current capability of the contact elements, the following current upper limits must not be exceeded: capacitor diameter 51.6 mm > 51.6 mm i ac, max 30 a 40 a b41554 sikorel  125 c page 3 of 18 please read cautions and warnings and important notes at the end of this document.
dimensional drawings d = 35.7 mm d 3 51.6 mm positive pole marking: + dimensions and weights ter- minal dimensions (mm) with insulating sleeve approx. weight (g) d l 1 l 1 1 d 2 max. a +0.2/  0.4 m5 35.7 +0.5/  1 55.7 62.0 8.2 12.7 65 m5 35.7 +0.5/  1 80.7 87.0 8.2 12.7 105 m5 35.7 +0.5/  1 105.7 112.0 8.2 12.7 135 m5 51.6 +0.5/  1 80.7 87.0 8.2 22.2 220 m5 64.3 +0.5/  1 80.7 87.0 8.2 28.5 370 m5 64.3 +0.5/  1 105.7 112.0 8.2 28.5 440 m5 76.9 +0.5/  1 105.7 112.0 8.2 31.7 620 m5 76.9 +0.5/  1 143.2 149.5 8.2 31.7 840 b41554 sikorel  125 c page 4 of 18 please read cautions and warnings and important notes at the end of this document.
packing capacitor diameter d (mm) length l (mm) packing units (pcs.) capacitor diameter d (mm) length l (mm) packing units (pcs.) 35.7 all 36 64.3 all 25 51.6 all 36 76.9 all 16 for ecological reasons the packing is pure cardboard. accessories the following items are included in the delivery package, but are not fastened to the capacitors: thread toothed washers screws/nuts maximum torque for terminals m5 a 5.1 din 6797 din 7985 / iso 7045-m5 10-5.6-z 2 nm the following items must be ordered separately. for details, refer to chapter "capacitors with screw terminals  accessories". item type ring clips b44030 clamps for capacitors with d 3 64.3 mm b44030 b41554 sikorel  125 c page 5 of 18 please read cautions and warnings and important notes at the end of this document.
overview of available types v r (v dc) 16 25 40 63 100 case dimensions d l (mm) c r ( m f) 1500 35.7 55.7 2200 35.7 55.7 35.7 80.7 3300 35.7 80.7 35.7 105.7 4700 35.7 55.7 35.7 80.7 51.6 80.7 6800 35.7 55.7 35.7 80.7 35.7 105.7 64.3 80.7 10000 35.7 55.7 35.7 80.7 35.7 80.7 51.6 80.7 64.3 80.7 15000 35.7 80.7 35.7 80.7 35.7 105.7 64.3 80.7 64.3 105.7 22000 35.7 80.7 35.7 105.7 51.6 80.7 64.3 105.7 76.9 105.7 33000 35.7 105.7 51.6 80.7 64.3 80.7 76.9 105.7 76.9 143.2 47000 51.6 80.7 64.3 80.7 64.3 105.7 76.9 143.2 68000 64.3 80.7 64.3 105.7 76.9 105.7 100000 64.3 105.7 76.9 105.7 76.9 143.2 150000 76.9 105.7 76.9 143.2 220000 76.9 143.2 the capacitance and voltage ratings listed above are available in different cases upon request. other voltage and capacitance ratings are also available upon request. b41554 sikorel  125 c page 6 of 18 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes c r 100 hz 20 c m f case dimensions d l mm esr typ 100 hz 20 c m w esr max 100 hz 20 c m w z max 20 khz 20 c m w i ac,max 100 hz 40 c a i ac,max 100 hz 85 c a i ac,r 100 hz 125 c a ordering code v r = 16 v dc 10000 35.7 55.7 15 38 26 17 12 4.5 b41554e4109q000 15000 35.7 80.7 12 26 21 23 16 5.8 b41554e4159q000 22000 35.7 80.7 9.0 21 18 29 21 7.5 b41554e4229q000 33000 35.7 105.7 7.0 17 15 30 24 8.7 b41554e4339q000 47000 51.6 80.7 5.0 13 13 30 30 11 b41554e4479q000 68000 64.3 80.7 4.0 13 11 40 38 14 b41554e4689q000 100000 64.3 105.7 4.0 10 9.0 40 39 14 b41554e4100q000 150000 76.9 105.7 4.0 10 8.0 40 40 16 b41554e4150q000 220000 76.9 143.2 3.0 8.0 7.0 40 40 19 b41554b4220q000 v r = 25 v dc 6800 35.7 55.7 16 32 27 18 13 4.7 b41554b5688q000 10000 35.7 80.7 14 28 21 21 15 5.4 b41554e5109q000 15000 35.7 80.7 11 24 17 26 19 6.8 b41554e5159q000 22000 35.7 105.7 8.0 20 15 30 22 8.1 b41554e5229q000 33000 51.6 80.7 6.0 15 12 30 29 10 b41554e5339q000 47000 64.3 80.7 5.0 13 11 40 34 12 b41554e5479q000 68000 64.3 105.7 5.0 11 9.0 40 35 13 b41554e5689q000 100000 76.9 105.7 4.0 9.0 8.0 40 39 15 b41554e5100q000 150000 76.9 143.2 4.0 7.0 6.0 40 40 19 b41554b5150q000 v r = 40 v dc 4700 35.7 55.7 14 33 24 20 14 5.2 b41554e7478q000 6800 35.7 80.7 12 28 17 24 16 6.2 b41554b7688q000 10000 35.7 80.7 11 27 17 26 19 6.7 b41554e7109q000 15000 35.7 105.7 8.0 20 12 30 22 8.0 b41554e7159q000 22000 51.6 80.7 6.0 15 12 30 29 10 b41554e7229q000 33000 64.3 80.7 5.0 11 10 40 34 12 b41554e7339q000 47000 64.3 105.7 5.0 10 9.0 40 35 13 b41554e7479q000 68000 76.9 105.7 4.0 9.0 8.0 40 39 15 b41554e7689q000 100000 76.9 143.2 4.0 7.0 6.0 40 40 19 B41554B7100Q000 b41554 sikorel  125 c page 7 of 18 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes c r 100 hz 20 c m f case dimensions d l mm esr typ 100 hz 20 c m w esr max 100 hz 20 c m w z max 20 khz 20 c m w i ac,max 100 hz 40 c a i ac,max 100 hz 85 c a i ac,r 100 hz 125 c a ordering code v r = 63 v dc 2200 35.7 55.7 26 60 30 13 9.4 3.4 b41554e8228q000 3300 35.7 80.7 17 39 24 19 14 4.9 b41554e8338q000 4700 35.7 80.7 13 31 20 24 17 6.2 b41554e8478q000 6800 35.7 105.7 10 23 17 28 20 7.2 b41554e8688q000 10000 51.6 80.7 7.0 18 14 30 27 9.6 b41554e8109q000 15000 64.3 80.7 6.0 15 11 40 31 11 b41554e8159q000 22000 64.3 105.7 5.0 12 9.0 40 35 13 b41554e8229q000 33000 76.9 105.7 4.0 9.0 8.0 40 39 15 b41554e8339q000 47000 76.9 143.2 4.0 7.0 6.0 40 40 19 b41554b8479q000 v r = 100 v dc 1500 35.7 55.7 38 83 34 12 8.8 3.1 b41554b9158q000 2200 35.7 80.7 26 57 30 17 12 4.2 b41554e9228q000 3300 35.7 105.7 17 37 24 21 15 5.4 b41554e9338q000 4700 51.6 80.7 13 29 20 29 20 7.2 b41554e9478q000 6800 64.3 80.7 8.0 22 17 36 25 9.1 b41554e9688q000 10000 64.3 80.7 7.0 15 14 40 30 11 b41554e9109q000 15000 64.3 105.7 6.0 13 11 40 36 13 b41554e9159q000 22000 76.9 105.7 5.0 11 9.0 40 39 14 b41554b9229q000 33000 76.9 143.2 4.0 9.0 8.0 40 40 17 b41554b9339q000 b41554 sikorel  125 c page 8 of 18 please read cautions and warnings and important notes at the end of this document.
1) refer to chapter "general technical information, 5 useful life" on how to interpret useful life. useful life 1) depending on ambient temperature t a under ripple current operating conditions d 51.6 mm useful life 1) depending on ambient temperature t a under ripple current operating conditions d 3 64.3 mm b41554 sikorel  125 c page 9 of 18 please read cautions and warnings and important notes at the end of this document.
frequency factor of permissible ripple current i ac versus frequency f v r (v dc) 16; 25 40 63 100 d = 35.7 mm b c d d d = 51.6 mm a b c c d = 64.3 mm a a c c d = 76.9 mm a a b c frequency characteristics of esr typical behavior v r (v dc) 16; 25 40 63 100 d = 35.7 mm b c d d d = 51.6 mm a b c c d = 64.3 mm a a c c d = 76.9 mm a a b c b41554 sikorel  125 c page 10 of 18 please read cautions and warnings and important notes at the end of this document.
impedance z versus frequency f typical behavior at 20 c c r m f v r v dc d mm curve 150000 68000 16 40 76.9 76.9 a b 15000 100 64.3 c 10000 47000 1500 16 40 100 35.7 35.7 35.7 d e f b41554 sikorel  125 c page 11 of 18 please read cautions and warnings and important notes at the end of this document.
cautions and warnings personal safety the electrolytes used by epcos have been optimized both with a view to the intended application and with regard to health and environmental compatibility. they do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (dmf) or dimethyl acetamide (dmac). furthermore, some of the high-voltage electrolytes used by epcos are self-extinguishing. as far as possible, epcos does not use any dangerous chemicals or compounds to produce operating electrolytes. however, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. however, the amount of dangerous materials used in our products is limited to an absolute minimum. materials and chemicals used in epcos aluminum electrolytic capacitors are continuously adapted in compliance with the epcos corporate environmental policy and the latest eu regulations and guidelines such as rohs, reach/svhc, gadsl, and elv. mds (material data sheets) are available on the epcos website for all types listed in the data book. mds for customer specific capacitors are available upon request. msds (material safety data sheets) are available for all of our electrolytes upon request. nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: no electrolyte should come into contact with eyes or skin. if electrolyte does come into contact with the skin, wash the affected areas immediately with running water. if the eyes are affected, rinse them for 10 minutes with plenty of water. if symptoms persist, seek medical treatment. avoid inhaling electrolyte vapor or mists. workplaces and other affected areas should be well ventilated. clothing that has been contaminated by electrolyte must be changed and rinsed in water. b41554 sikorel  125 c page 12 of 18 please read cautions and warnings and important notes at the end of this document.
product safety the table below summarizes the safety instructions that must be observed without fail. a detailed description can be found in the relevant sections of chapter "general technical information". topic safety information reference chapter "general technical information" polarity make sure that polar capacitors are connected with the right polarity. 1 "basic construction of aluminum electrolytic capacitors" reverse voltage voltages of opposite polarity should be prevented by connecting a diode. 3.1.6 "reverse voltage" mounting position of screw- terminal capacitors screw terminal capacitors must not be mounted with terminals facing down unless otherwise specified. 11.1. "mounting positions of capacitors with screw terminals" robustness of terminals the following maximum tightening torques must not be exceeded when connecting screw terminals: m5: 2.5 nm m6: 4.0 nm 11.3 "mounting torques" mounting of single-ended capacitors the internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. avoid any compressive, tensile or flexural stress. do not move the capacitor after soldering to pc board. do not pick up the pc board by the soldered capacitor. do not insert the capacitor on the pc board with a hole space different to the lead space specified. 11.4 "mounting considerations for single-ended capacitors" soldering do not exceed the specified time or temperature limits during soldering. 11.5 "soldering" soldering, cleaning agents do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. 11.6 "cleaning agents" upper category temperature do not exceed the upper category temperature. 7.2 "maximum permissible operating temperature" passive flammability avoid external energy, e.g. fire. 8.1 "passive flammability" b41554 sikorel  125 c page 13 of 18 please read cautions and warnings and important notes at the end of this document.
topic safety information reference chapter "general technical information" active flammability avoid overload of the capacitors. 8.2 "active flammability" maintenance make periodic inspections of the capacitors. before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. do not apply excessive mechanical stress to the capacitor terminals when mounting. 10 "maintenance" storage do not store capacitors at high temperatures or high humidity. capacitors should be stored at +5 to +35 c and a relative humidity of 75%. 7.3 "shelf life and storage conditions" reference chapter "capacitors with screw terminals" breakdown strength of insulating sleeves do not damage the insulating sleeve, especially when ring clips are used for mounting. "screw terminals  accessories" display of ordering codes for epcos products the ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of epcos, or in order-related documents such as shipping notes, order confirmations and product labels. the varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. detailed information can be found on the internet under www.epcos.com/orderingcodes. b41554 sikorel  125 c page 14 of 18 please read cautions and warnings and important notes at the end of this document.
symbols and terms symbol english german c capacitance kapazit?t c r rated capacitance nennkapazit?t c s series capacitance serienkapazit?t c s,t series capacitance at temperature t serienkapazit?t bei temperatur t c f capacitance at frequency f kapazit?t bei frequenz f d case diameter, nominal dimension geh?usedurchmesser, nennma? d max maximum case diameter maximaler geh?usedurchmesser esl self-inductance eigeninduktivit?t esr equivalent series resistance ersatzserienwiderstand esr f equivalent series resistance at frequency f ersatzserienwiderstand bei frequenz f esr t equivalent series resistance at temperature t ersatzserienwiderstand bei temperatur t f frequency frequenz i current strom i ac alternating current (ripple current) wechselstrom i ac,rms root-mean-square value of alternating current wechselstrom, effektivwert i ac,f ripple current at frequency f wechselstrom bei frequenz f i ac,max maximum permissible ripple current maximal zul?ssiger wechselstrom i ac,r rated ripple current nennwechselstrom i leak leakage current reststrom i leak,op operating leakage current betriebsreststrom l case length, nominal dimension geh?usel?nge, nennma? l max maximum case length (without terminals and mounting stud) maximale geh?usel?nge (ohne anschlsse und gewindebolzen) r resistance widerstand r ins insulation resistance isolationswiderstand r symm balancing resistance symmetrierwiderstand t temperature temperatur d t temperature difference temperaturdifferenz t a ambient temperature umgebungstemperatur t c case temperature geh?usetemperatur t b capacitor base temperature temperatur des geh?usebodens t time zeit d t period zeitraum t b service life (operating hours) brauchbarkeitsdauer (betriebszeit) b41554 sikorel  125 c page 15 of 18 please read cautions and warnings and important notes at the end of this document.
symbol english german v voltage spannung v f forming voltage formierspannung v op operating voltage betriebsspannung v r rated voltage, dc voltage nennspannung, gleichspannung v s surge voltage spitzenspannung x c capacitive reactance kapazitiver blindwiderstand x l inductive reactance induktiver blindwiderstand z impedance scheinwiderstand z t impedance at temperature t scheinwiderstand bei temperatur t tan d dissipation factor verlustfaktor l failure rate ausfallrate e 0 absolute permittivity elektrische feldkonstante e r relative permittivity dielektrizit?tszahl w angular velocity; 2  p  f kreisfrequenz; 2  p  f note all dimensions are given in mm. b41554 sikorel  125 c page 16 of 18 please read cautions and warnings and important notes at the end of this document.
the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our ma- terial data sheets on the internet (www.epcos.com/material). should you have any more de- tailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "general terms of delivery for products and services in the electrical in- dustry" published by the german electrical and electronics industry association (zvei) . important notes page 17 of 18
7. the trade names epcos, alu-x, ceradiode, ceralink, cerapad, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, exocore, filtercap, formfit, leaxield, miniblue, minicell, mkd, mkk, motorcap, pcc, phasecap, phasecube, phasemod, phicap, pqsine, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. important notes page 18 of 18


▲Up To Search▲   

 
Price & Availability of B41554B7100Q000

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X